Prusa i3 Rework Firmware

 

 http://reprap.org/wiki/Prusa_i3_Rework_Firmware

 

 

Introduction | Bill of materials | Y-axis assembly | X-axis assembly | Connecting X-axis and Z-axis | Motor assembly
X and Y-axis motions | Heated bed assembly | Extruder assembly | Electronics and wiring |Marlin Firmware

• 1 Downloads - software and firmware
• 2 Change the firmware
  • 2.1 Step 1: Open the Settings
  • 2.2 Step 2: Date and name of the author of the changes
  • 2.3 Step 3: BAUDRATE
  • 2.4 Step 4: RAMPS Motherboard
  • 2.5 Step 5: Thermistor
  • 2.6 Step 6: Temperatures Min and Max
  • 2.7 Step 7: Reverse movement of the motors
  • 2.8 Step 8: Position of endstops
  • 2.9 Step 9: Set size of the print area
  • 2.10 Step 10: Speed of the motor
• 3 Install Marlin Firmware on the board
  • 3.1 Step 1: Choose Board
  • 3.2 Step 2: Choose Serial COM Port
  • 3.3 Step 3: Compile and verify the firmware
  • 3.4 Step 4: Upload to Arduino

 

Sprinter Firmware Guide

 Youtube video

Still Extruding: Configuring Sprinter Firmware

 

 

The incomplete RepRap Prusa Mendel beginner's guide

 

 

  

 

 

Custom Buttons in Pronterface: An Intro to GCode

  Sprinter kliment Firmware for RepRap printers and similar devices

 

 

Troubleshooting Reprap Prusa Arduino 2560 + RAMPS 1.4